CAT 5E/5/6/7 RJ45 Network Cables customization
1) Bulk cable according to request.
2) RJ45 Connector in 3 micro meter gold plated. and 5, 10, 15, 30 and 50 micro meter gold plated available on request.
3) Various of Color of Black, Grey, Blue, Red, Yellow, Orange, Violet, Green and White available
4) System warranty according to Fluke Channel Link Test Pass
Some knowledges about network cables:
1)difference between Cat 5, Cat 5e and Cat 6:
The difference is in the bandwith ratings. Cat 5e has a higher bandwidth than Cat 5. Cat 6 has a higher rating than Cat 5e. They all use RJ45 connectors and are usually interchangeable depending on the bandwidth requirements of devices.
2)difference between UTP and STP:
UTP stands for Unshielded Twisted Pairs.
STP stands for Shielded Twisted Pairs.
The ethernet standard uses data packet transmission and error correction. Unlike streaming data transmission, this standard simply buffers and repeats until it has a complete instruction set which compensates data transmission errors.
Since UTP was cheaper in the beginning, it generally became the standard. If you are using the cables for ethernet connections, either should work. If you are using for a stream data system like video tranmission, the shielded should be used.
3)For connecting devices to a router or switch, use the standard straight cables.For connecting devices directly to each other, use a "Crossover" cable.
4) This network cables are made to the highest standards and will support all current and emerging new technologies. means they support Power over Ethernet (POE) and they are Voice Over IP (VOIP) compliant