6) Are all of the new HDMI versions backward compatible with previous versions?
Yes, all HDMI versions are fully backward compatible with all previous versions.
7)What testing is required?
Prior to mass producing or distributing any Licensed Product or component that claims compliance with the HDMI Specification (or allowing someone else to do such activities), each Adopter must test a representative sample for HDMI compliance. First, the Adopter must self test as specified in the then-current HDMI Compliance Test Specification. The HDMI Compliance Test Specification provides a suite of testing procedures, and establishes certain minimum requirements specifying how each HDMI Adopter should test Licensed Products for conformance to the HDMI Specification. Such compliance testing is limited to evaluation of a product's compliance with the HDMI Specification and is not designed to test the overall performance of any Licensed Product.
Second, each Adopter must submit the first product of each Licensed Product type (i.e. source, sink, repeater, or cable) to an HDMI Authorized Testing Center (ATC) for testing. Once an Adopter product of each type has passed testing, it is not required to submit to the ATC subsequent products of that type. However, Adopters must still self-test the products for compliance to the HDMI test specification. For example, once an Adopter's television has passed ATC testing, it is not required to submit another television or other display for ATC testing. However, to help ensure HDMI interoperability, we encourage Adopters to use the ATCs.
8) Is HDMI backward compatible with DVI (Digital Visual Interface)?
Yes, HDMI is fully backward compatible with DVI compliant devices. HDMI DTVs will display video received from existing DVI-equipped products, and DVI-equipped TVs will display video from HDMI sources. However, some older PCs with DVI are designed only to support computer monitors, not televisions. Consumers buying a PC with DVI should make sure that it specifically includes support for television formats and not just computer monitors.
Also, consumers may want to confirm that the DVI interface supports High-bandwidth Digital Content Protection (HDCP), as content that requires HDCP copy protection will require that both the HDMI and DVI devices support HDCP to properly view the video content.
9) Does HDMI accommodate long cable lengths?
Yes. HDMI technology has been designed to use standard copper cable construction at long lengths. In order to allow cable manufacturers to improve their products through the use of new technologies, HDMI specifies the required performance of a cable but does not specify a maximum cable length. We have seen cables pass "Standard Cable" HDMI compliance testing at lengths of up to a maximum of 10 meters without the use of a repeater. It is not only the cable that factors into how long a cable can successfully carry an HDMI signal, the receiver chip inside the TV or projector also plays a major factor. Receiver chips that include a feature called "cable equalization" are able to compensate for weaker signals thereby extending the potential length of any cable that is used with that device.
With any long run of an HDMI cable, quality manufactured cables can play a significant role in successfully running HDMI over such longer distances.
10) How do I run HDMI cables longer than 10 meters?
There are many HDMI Adopters working on HDMI solutions that extend a cable's effective distance from the typical 10 meter range to much longer lengths. These companies manufacture a variety of solutions that include active cables (active electronics built into cables that boost and extend the cable's signal), repeaters, amplifiers as well as CAT5/6 and fiber solutions.